# Messages file for Window help for AlphaSave 1.25

# Info Window

info.name:AlphaSave: The Ultimate Screensaver
info.purpose:Protecting the screen from blowing up
info.author:Me!! Send me a birthday card on 6th October!
info.version:This is version
info.release:This Release is
info.license:The License is
info.copyright:Visit http://www.alphapro.demon.co.uk/ for more information.|M\Sto visit the Alpha Progamming WWW Site.
info.back:\TAlphaSave Information \w

main.delay:The 'Time Delay' is the time until the screensaver loads.
main.hourup:\Smove up one hour.|M\Amove down one hour.
main.hourdown:\Smove down one hour.|M\Amove up one hour.
main.minuteup:\Smove up one minute.|M\Amove down one minute.
main.minutedown:\Smove down one minute.|M\Amove up one minute.
main.secondup:\Smove up one second.|M\Amove down one second.
main.seconddown:\Smove down one second.|M\Amove up one second.
main.save:\Ssave your current settings.
main.random:\Sset the screensaver routine to be random.
main.ordered:\Sset the screensaver routine to be ordered.
main.screensavers:\Sopen the Screensaver Selecter.
main.load:\Sload the previous settings.
main.options:\Sopen a \w with further configuration options.
main.on:\Stoggle the screensaver to be Active (On) or Dormant (Off).|MThis setting is not saved when you click on 'Save'.
main.back:\Tmain configuration \w

details.name:The name of the screensaver.
details.author:The author of the screensaver.
details.date:The date the screensaver was created.
details.file:The filename of the screensaver
details.info:Additional information about the screensaver
details.demo:\Sto load the screensaver to see what it looks like.
details.wimp:If selected, the screensaver is a multi-tasking WIMP Program.
details.lib:\Git is not supported in this version.
details.single:If selected, the screensaver is an obsolete single-tasking program.
details.back:\Tdetails on the screensaver \w

scr.file:The filename of the screensaver.
scr.name:The name of the screensaver.
scr.author:The author of the screensaver.
scr.install:\Sinstall a new screensaver
scr.delete:\Sremove the current screensaver, either from memory or physicially
scr.more:\Ssee more details on this screensaver.
scr.next:\Ssee the next screensaver.|M\Asee the previous screensaver
scr.prev:\Ssee the previous screensaver.|M\Asee the next screensaver.
scr.active:If this is not selected, the screensaver will not be used.
scr.password:\Sset the password for after a screensaver is run
scr.demo:\Sload the screensaver to see what it looks like.
scr.help:\Sload a help application.
scr.on:\Stoggle the screensaver to be Active (On) or Dormant (Off).|MThis setting is not saved when you click on 'Save'.
scr.close:\Sclose this window.
scr.load:\Sload the previous settings.
scr.save:\Ssave the current settings.
scr.back:\Tscreensaver configuration \w

edit.file:\Tfilename of the screensaver
edit.name:\Tname of the screensaver
edit.author:\Tauthor's name
edit.dateset:\Sset the current date in the Date icon
edit.date:\Tdate the screensaver was made
edit.info:These are three extra lines of screensaver information.
edit.save:Drag the file type icon to a directory \w to save the file.|MPress RETURN or click on 'OK' to save the file.
edit.version:\Tversion of !SaveConf used to create the 'Data' file.
edit.cancel:\Scancel saving of the Data file and close the \w.
edit.multi:Click \s if this is a Multi-Tasking screensaver.
edit.lib:\Git is not supported in this version.
edit.single:Click \s if this is a Single-Tasking (obsolete) screensaver.
edit.back:\TEdit Screensaver details \w

reg.drag:Drag an AlphaSave key file to this icon.
reg.to:This shows to whom AlphaSave is registered
reg.code:This shows the Key Code of the registeree
reg.date:This shows the date of the key
reg.back:\Tregister /w

opt.banner:\Stoggle between having the StartUp Banner on or off.
opt.banup:\Sincrease the time by 1 second.|M\Adecrease the time by 1 second.
opt.bandown:\Sdecrease the time by 1 second.|M\Aincrease the time by 1 second.
opt.bantime:\Tamount of time the StartUp Banner stays on for.
opt.ok:\Skeep these settings in memory.
opt.cancel:\Scancel these settings and revert back to the previous ones.
opt.wimp:The WIMP Poll is how often AlphaSave polls the WIMP.|MAt a greater time, the computer will not be slowed down as much,|Mbut will not be as accurate, and vice-versa.
opt.wimpup:This wil increase the accuracy/response of te screensaver, but will|Mslow down your computer more.
opt.wimpdown:This will decrease the accuracy/response of the screensaver, but will|Mnot slow down your computer as much.
opt.spindown:Selecting this will force the hard drive to be spun down|Mwhen a screensaver starts. This only works on ADFS IDE drives.|MNote that this can be very dangerous to hard drives.
opt.ledoff:"This turns off the keyboard LEDs when it screensaves.|MYet another way to save power! ;-)
opt.cd:Select this if you want the CD ROM drive to be spun down when|Mscreensaving. This will stop playing an Audio CD.
opt.scrpower:This will save power by turning the monitor off when screensaving.|MClick on Configure to configure how you want it turned off.
opt.config:Click on this to configure the screen power saving.
opt.flash:Select this if you want the keyboard LEDs to flash.
opt.leds:This is one of the ways which the keyboard LEDs can flash.
opt.padlock:This shows whether the configure password is set or not.|MIf the padlock is sealedm the password is active.|MIf the padlock is not sealed, the password is not active.
opt.setpass:\Sset the configuration password
opt.unsetpass:\Sunset the configuration password
opt.back:\TExtra Options \w
opt.sleep:If this is set, sleep/no-sleep corners are active.|MIf the mouse is over the sleep corner, the screensaver is activated.|MIf the mouse is over the no-sleep corner, the screensaver will not be activated.

install.main:Drag a screensaver here to install/update it.
install.all:\Sinstall all screensavers in the AlphaSave directory.
install.back:\TInstall Screensaver \w

password.text:Type the password here.
password.ok:\Saccept the password.
password.cancel:\Sabort setting/unsetting the password.
password.back:\Tpassword \w

wait.main:Please wait. An operation is being performed...

ync.yes:Save settings and continue with quit/shutdown.
ync.no:Do not save settings but still quit.
ync.cancel:Do not quit/shutdown, but do not save settings.

power.active:If this is set, the settings for the box will be active.
power.up:\Sincrease the amount of minutes by one.|M\Adecrease the amount of minutes by one.
power.down:\Sdecrease the amount of minutes by one.|M\Aincrease the amount of minutes by one.
power.mode:\Ttype of mode for the screen to switch to.|MBlank video is just a blank screen, Standby and Suspend are|Mlow-power modes, Monitor Off uses the least power.
power.menu:\Sopen up a list of powersaving modes.
power.mdf:\Tlocation of the Monitor Definition File.|MDrag a MDF here to set it.
power.back:\TPowerSave Configuration \w
